CO2 Incubators (Water or Air Jacketed)

  • Stainless steel interior and shelves
  • Models with water or air jacket
  • Benchtop, floor and high capacity models with chamber capacities from 42 to 1092 litres
  • Temperature range (depending on model):
    Ambient + 8 °C to 60 °C
    Ambient + 5 °C to 50 °C
  • CO2 range: 0 - 20 %, infrared CO2 sensor
  • CO2 recovery rate: < 5 minutes
  • Independent overtemperature thermostat, overtemperature and CO2 alarm
  • Relative humidity (passive) up to 95 %
  • Models with dry heat decontamination cycle, copper shelves or copper coated HEPA filters available

Drosophila Incubators

  • Require up to 70 % less power than compressor based models
  • Day/night controls with LED lighting to provide an excellent environment for Drosophila culture
  • Temperature range: 15 °C to 40 °C (at 20 °C ambient)
  • Overtemperature alarm, door ajar alarm
  • Digital display
  • Overtemperature thermostat
  • 1 interior electrical outlet
  • Models with 185 l or 546 l chamber capacity

High Performance Ovens

  • High performance forced air ovens:
    • For continuous drying operations
    • Horizontal air flow, heated air is continuously circulated
    • Independent overtemperature safety feature
    • Three adjustable air intake and exhaust ports
    • LED display

    • Ovens with programmable Watlow controller:
      • Temperature range: 15 °C above ambient to
         306 °C
      • Data logging capabilities via RS485
      • 1 door
    • Ovens SMO14HP-2, SMO38HP-2 (with 2 doors):
      • Programmable Juno dTRON controller
         (max. 27 steps)
      • 2 doors

Oven for Cleanrooms

  • For high temperature cleanroom work
  • Stainless steel interior and exterior
  • Temperature range: 20 °C above ambient to 270 °C
  • Rapid heat recovery: 6 minutes to reach 150 °C
  • Programmable Watlow Controller
  • 3 adjustable air intake and exhaust ducts, easily removed for cleaning, allow use of either room or circulated air
  • Supplied with nitrogen inlet port, high-temperature silicone door gasket, and HEPA filter
  • Chamber capacity: 110 l

Ovens (forced air or gravity convection)

Forced air ovens:
  • Horizontal air flow
  • Temperature range: Ambient + 20 °C to 306 °C
  • Independent overtemperature safety feature
  • Digital timer
  • 1 access port
  • 39 l, 86 l or 139 l chamber capacity
Large forced air ovens:
  • Horizontal air flow
  • Temperature range: Ambient + 15 °C to 260 °C
  • Independent overtemperature safety feature
  • Digital timer
  • Adjustable exhaust port
  • 387 l or 781 l chamber capacity
Gravity convection ovens:
  • Gravity convection air flow
  • For work with powders, granulated and light materials
  • Temperature range: Ambient + 15 °C to 225 °C
  • Digital timer
  • 97 l or 141 l chamber capacity

Peltier Cooled Incubators

  • Require up to 70 % less energy than alternative models
  • Temperature range: 15 °C to 40 °C (at 20 °C ambient)
  • Overtemperature alarm, door ajar alarm
  • 1 interior electrical outlet
  • Models with 99 l, 185 l or 546 l chamber capacity

Roll-In Large Capacity Incubators

  • With rails for Roller Apparatus
  • Extra large, with tempered glass viewing window
  • Stainless steel interior and shelves
  • Air jacketed
  • Overtemperature alarm
  • 1 interior electrical outlet
  • 1 access port
Units with CO2 feature:
  • Temperature range: Ambient + 8 °C to 60 °C
  • CO2 range: 0 - 20 %
  • Infrared CO2 sensor
  • CO2 recovery rate: < 5 minutes
  • Models with 879 l, 1125 l und 1641 l chamber capacity
Units without CO2 feature:
  • Temperature range: Ambient + 8 °C to 70 °C
  • Models with 872 l and 1092 l chamber capacity

Shaking Water Baths

  • Smooth reciprocal shaking motion: 20 - 200 rpm
  • Adjustable stroke length: 1.2, 2.5 or 3.8 cm
  • Also usable without shaking operation
  • Temperature range: ambient + 5 °C to 80 °C
  • 17 or 27 litres tank capacity
  • Independent oscillation and temperature controls
  • Supplied with stainless steel gable cover and
    shaking platform
  • Flask holders available on request

Standard Incubators

  • Temperature range: ambient + 8 °C to 70 °C
  • Capacity (depending on model): 56 - 326 litres
  • Single and stacked models
  • Stainless steel interior and shelves
  • Triple wall construction
  • Air jacketed
  • Heated outer door, inner glass door
  • Overtemperature alarm
  • 1 interior electrical outlet
  • 1 access port

Vacuum Ovens

  • Programmable Watlow-Controller
  • Stainless steel interior
  • RS485 communication port
  • End vacuum: 10 µmHg
    (10 mTorr, 0.0013 kPa, 0.0133 mbar)
  • Heat-up time: 120 minutes to 150 °C
Standard ovens:
  • Temperature range: Ambient + 10 °C to 220 °C
  • Temperature adjustable in 0.1 °C increments
  • Different vacuum units available
  • Tempered glass viewing door
Large capacity oven:
  • Temperature range: Ambient + 15 °C to 220 °C
  • Stand with built-in vacuum pump mount
  • Stainless steel exterior option available for clean room applications

Water Baths

  • Temperature range: Ambient + 5 °C to 80 °C
  • Overtemperature protection
  • Easy-to-clean stainless steel tank
  • Recessed heating element prevents „burnout“
  • Digital display, front panel touch pad
  • Pocket handles for easy lifting
  • Supplied with stainless steel gable cover
  • Units with 7 l and 23 l capacity
  • Circulating unit with 22 l capacity available

Chambers for Anaerobic and 
Hypoxic Applications

  • 5 different models with patented, glove free sample handling using comfortable sleeve cuffs
  • Stainless steel body with acrylic glass front for an unobstructed view of the interior workspace
  • Separated incubator and working space
  • Temperature range: ambient +5 °C to 70 °C
  • All models with 1 interior electrical outlet
  • User-friendly control panel
  • Easy to handle air-lock for simple transfer of samples
BACTRON: Chambers for Anaerobic Applications
  • Automatic pressure control provides a mild overpressure
  • Internal manometer for a quick, visual check of pressure level to ensure correct handling
  • Palladium catalyst cartridge improves anaerobic efficiency
BACTROX: Chamber for Hypoxic Applications
  • Independent control of O2 from 0,5 % to 20 % and CO2 from 1 % to 20 %, in 0.1 % increments each
  • Immediate access to workspace via sleeves
    (no vacuum system or foot pedals)
NEW!  Bactron 400HP – High Performance anaerobic chamber
  • Incubator capacity: 400 plates / Airlock capacity: 216 plates
  • Programmable automated airlock cycles (up to 9 cycles)
  • HEPA filtration of workspace and incubator (ISO class 3 standard)
  • Oxygen sensor (O2) and Relative Humidity sensor (RH)
  • Touch-Screen with high resolution multi-colour display
  • Simultaneous display of relevant process data and logging to SD Card
  • Catalyst with integrated activated carbon prefilter 
  • KF40 Expansion Port for cable pass-through
  • Single plate entry system
  • Hinged front flange for easy loading of lab devices and supplies and easy cleaning of workspace and incubator